EFFETTO MARIPOSA Caffelatex Tubeless Plus 90-95 mm Strip 2 Units

Caffélatex Tubeless Strip Plus/Fat Is A Very Light, Puncture-Proof And Transparent Tubeless Rim Strip That Makes Tubeless Conversions Quick And Easy. Strip Allows Tubeless Conversion Of Most Plus And Fat Mountain Bike Wheels, Using Tubeless Or Tubeless-Ready Tyres And Caffélatex Or Végétalex Sealant. For Standard Size Bicycle Rims, See Caffélatex Tubeless Strip. Features: - The Easiest Way To Perform A Tubeless Conversion - Very Light Tubeless Rim Strip - Damage-Resistant - Long Lasting, It Can Be Moved From One Wheel To Another - Extended Range Of Widths, Covering Plus And Fat Wheel Sizes Tubeless Conversion, Made Easy: - Caffélatex Strip Is The Ultimate Tubeless Solution For Very Difficult Rims (For Example, Cut-Out Fat Rims, Aluminum Rims With Mat Surface Finishing, Carbon Rims With Mould Release Treatment - Where No Tape Sticks Very Long -, Rims With Very Deep Channel, Pin-Joined Rims Where The Junction Is Not Welded Etc.). This Because Strip Isn’T Adhesive: It’S Made In One Piece And Relies On Its Elasticity To Sit Tight On The Rim. To Convert A Rim To Tubeless, Simply Remove The Existing Rim-Strip, Choose The Appropriate Strip Size And Follow The Following Easy Steps: - (Optional Step, Not For Cut-Out Or Single Wall Rims) Use A Roll Of Electrician Tape And Seal The Spoke Holes Of The Rim. This Just In Order To Create An Additional Protection To Prevent Sealant From Getting Inside The Rim Inner Chamber, In The Unlikely Case The Strip Moves And Let Some Liquid Go Through. - Insert The Provided Caffélatex Tubeless Valve In The Strip, So That The Rubber Base Is In Contact With Strip. - Secure Strip To The Rim, Tightening The Nut On The Valve Stem. It’S Important To Push The Valve Base Against The Rim While Doing So, To Achieve A Proper Air-Tightness.
Important: Some Single Wall Rims (Mostly Aluminum, Cut-Out Rims For Fat Bikes) Might Require Fitting An Additional Washer Under The Nut, Before Threading It Against The Rim. We Provide One Additional Washer Per Valve For Plus L And All Fat Strip; - Keeping The Wheel With The Valve At 12 O’ Clock, Finish Mounting Strip Onto The Rim. - With A Screwdriver Or A Similar Tool, Center Strip Inside The Rim Channel. - Add Tubeless Tyre, Caffélatex Sealant, Inflate, Ride. Lightweight: Weights(*) For A Single Strip Are: - Strip Fat L 26″/27,5″: 205 G Highly Resistant To Damage And Puncture: - The Special Polymer Employed In Its Construction Makes Strip Highly Resistant To Damage And Puncture. It’S Also Very Stable From A Chemical Standpoint And Cannot Be Damaged By Caffélatex Or Other Non-Chemically-Aggressive Tyre Sealants. Long Lasting: - Something You Can Do With Strip That You Simply Can’T With Tubeless Tapes: Moving Strip From One Rim To Another. 
As The Strip Material Is Very Durable, Its Lifespan Can Exceed The One Of The Rim It’S Mounted On, And Can It Be Removed And Mounted On Another Rim. Strip Can Also Be Removed And Mounted On The Same Rim If A Spoke Needs To Be Replaced.